Feb 2, 2006

Tips For Makeing Bunny

To make the inside of the ears, take the plastic applicator from the Playtex tampon and use scissors or a utility knife to slice it into vertical strips. The tip of each strip should be one of the applicator “petals”; continue cutting till you reach the ridged base of the tube, then cut across. Round off the square bottom of each strip.


Fill the length of each rabbit ear tampon with hot glue and press a plastic applicator strip into place, with the pointed end up and the curved part pointing out.



Remove string from Playtex tampon and set it aside. Set the tampon “point” up. Use a generous amount of hot glue to attach ears, placing them inside the “creases” or folds of the tampon.


Cut off the tip of one of the remaining pink plastic applicator “petals.” This triangular piece will be the nose. Hot glue it to the tip of the Playtex tampon.



Hot glue the eyes in place.


Cut the pipe cleaners into four two-inch pieces and hot glue into place on either side of the nose. If you wish to hang the bunny as an ornament, hot glue the reserved string onto the back.

0 comments:

Post a Comment

Did you like this page? If so , you have several options to see her again. The first is press Control D to add to your favorites. The second is subscribe by email to receive our updates. The third is add our RSS FEED the reader of your choice. The fourth, follow us on Twitter. The fifth option is to enter our interactive network through Google Buzz. And the most recent option is to join the official site our community on Facebook real -time for our images free of charge.

 

Friends

Followers

Welcome

Beautiful World | Drawings Arts | Illusions | Amazing Facts | Sculpture Copyright © 2009 Not Magazine 4 Column is Designed by Ipietoon Sponsored by Dezigntuts